Screen Printing Machine|Labeling Machine|Pad Printing Machine|Hot Stamping Machine
Products Category
Contact Us


Name: IvanZhang
Tel: +86-755-81736312
Fax: +86-755-81736318
Mobile: +(86)13530467734
Add: SongGan , BaoAn, ShenZhen City,GuangDong Province, China , Email: sales@printer-manufacture.com
Yahoo! ID: hengcaiprinter@yahoo.com ҷϢ ҷϢ

Technology

The Operation Process Of Heat Press Printing Mug

Author:
 

 
Temperature: 200°
Time: 3min to 4 min.(depending on the type of press)
Pressure: Heavy
1. Print transfer and trim to slightly smaller size than mug.
2. Attach the transfer in position to the mug with heat resistant tape.
3. Wrap the mug with a teflon sheet or plain white paper.
4. Place the mug in the press and press for 4 - 4 1/2 minutes
5. Remove the mug from the press and remove the transfer immediately. (A plastic plate-scraper will help.)
6. Place in water to cool or leave in clean, dry area
Additional notes:
1. Ceramic mugs tend to taper from top to bottom. This "inconsistency" can make it difficult to apply
full wrap transfers to a mug and can compromise the imaging. Moistening the transfer or using additional
tape to fasten the transfer securely can help eliminate problems.
2. It is important to recognize what your specific mugs"safe area" is. It is suggested that you make
a test mug to define an area that you can depend on for quality results. For example, an average mug may
take an image up to 1/2 inch of the top and bottom and no closer than 1 inch of the handles horizontally.